Nikon Z9 Firmware Update Version 1.10 Officially Released
The Nikon Z9 Firmware Update Version 1.10 is now officially released and available for download online.
Download link: Nikon Z9 Firmware Version 1.10
Changes from “C” Firmware Version 1.00 to 1.10
- • Increased the burst length for dual-format (NEF/RAW + JPEG or JPEG + JPEG) pictures taken at 20 fps in continuous high-speed release mode.
- “C” firmware version 1.00:
- – NEF/RAW (high-efficiency★) + JPEG basic (large): Approx. 3 seconds *
- – JPEG Slot 1 – JPEG Slot 2 (Slot 1: JPEG fine (large); Slot 2: JPEG basic (small)): Approx. 3 seconds *
- “C” firmware version 1.10:
- – NEF/RAW (high-efficiency★) + JPEG basic (large): Approx. 8 seconds *
- – JPEG Slot 1 – JPEG Slot 2 (Slot 1: JPEG fine (large); Slot 2: JPEG basic (small)): Approx. 8 seconds *
* The length of the burst that can be taken before the frame advance rate drops. Figures are reference values obtained via in-house measurements performed using a NIKKOR Z 50mm f/1.8 S lens and a ProGrade Digital COBALT 1700R 325GB CFexpress memory card. Burst length will drop in some circumstances, including if:
- – Backup is selected for Role played by card in Slot 2 or
- – ON is selected for Auto distortion control.
- “C” firmware version 1.00:
- • Options highlighted in the Filtered playback criteria list in the PLAYBACK MENU can now also be selected and deselected by pressing the multi selector right.
- • Fixed an issue that prevented optional SB-5000 flash units synchronizing with the shutter when all the following conditions were met:
- – A shutter speed faster than the flash sync speed was selected with 1/200 s (Auto FP) or 1/250 s (Auto FP) chosen for Custom Setting e1 Flash sync speed in the CUSTOM SETTINGS MENU.
- – The SB-5000 was controlled via radio AWL using an optional WR-R10 or WR-R11a wireless remote controller mounted on the camera.
- – The flash unit was not mounted on the camera accessory shoe.
Nikon Z9 Body: $5,496.95 at Amazon, B&H, Adorama.
Read more: